Iron powder dryer

Capacity：6～20 tons/hour......

Introduction： The iron powder dryer is specially used for the iron powder, iron filings, steel filings, copper filings, slag, limestone, coal powder, clay, etc. processed by.....

Product Description

The iron powder dryer is specially used for the iron powder, iron filings, steel filings, copper filings, slag, limestone, coal powder, clay, etc. processed by the dryer. Degreasing and drying can be realized at the same time. The special drying and drying equipment for iron powder occupies a small area, has stable performance and good energy-saving effect. The material can be uniformly distributed in the radial section of the dryer, and the material curtain becomes thin, uniform, and complete, fully contacting the hot air flow, and achieving the purpose of making full use of heat energy.

Product Advantage

Product advantages

1. Iron powder dryer is widely used in building materials, metallurgy, chemical industry, cement industry to dry slag limestone, coal powder, slag, clay and other materials. It can also be used in the production of compound fertilizers, drying fertilizers with a certain humidity and granularity, and has the function of one machine with multiple functions.

2. The distribution and angle design of the lifting plate of the iron powder dryer is reasonable, and the performance is reliable, so the heat energy utilization rate is high, the drying is uniform, the number of cleaning materials is small, and the maintenance is convenient.

3. The iron powder dryer can also provide customers with a complete set of iron powder dryer equipment, production line design schemes and various technical support, so as to relieve users from worries.

Product Parameter

technical parameter

Specification model (mm)	Rotating speed (r/min)	Slope (%)	Intake air temperature (℃)	Production capacity (t/h)	weight (t)
Ф800×8000	3-8	3-5	≤700	0.8-2.0	3.5
Ф800×10000	3-8	3-5	≤700	0.8-2.5	4.5
Ф1000×10000	3-8	3-5	≤700	1.0-3.5	5.6
Ф1200×10000	3-8	3-5	≤700	1.8-5	14.5
Ф1200×12000	3-8	3-5	≤700	2-6	14.8
Ф1500×12000	2-6	3-5	≤800	3.5-9	17.8
Ф1800×12000	2-6	3-5	≤800	5-12	25
Ф2200×12000	1.5-6	3-5	≤800	6-15	33
Ф2200×18000	1.5-6	3-5	≤800	10-18	53.8
Ф2200×20000	1.5-6	3-5	≤800	12-20	56
Ф2400×20000	1.5-5	3-5	≤800	18-30	60
Ф3000×20000	1.5-5	3-5	≤800	25-35	78
Ф3000×25000	1.5-5	3-5	≤800	32-40	104.9

Working Principle

Structure principle

The drum of the iron powder dryer is a slightly inclined and rotatable cylinder. The wet material enters from the upper part of one end, and the dry material is collected from the lower part of the other end. Hot air enters from the feed end or the discharge end, and is discharged from the upper part of the other end. The cylinder is equipped with a forward copying board, so that the material is continuously picked up and sprinkled during the rotation of the cylinder, so that it is fully in contact with the hot air flow, so as to improve the drying efficiency and move the material forward. The heat source for drying materials is generally hot air, high-temperature flue gas, etc. It can be selected according to the nature and quality requirements of the material.

Drying system

The iron powder dryer is mainly composed of the front and rear supporting roller device of the barrel device, the feeding and discharging device, the transmission device and the gear cover. (Auxiliary equipment supporting the dryer: combustion chamber, feeding and discharging equipment, dust collection equipment, etc. are not within the scope of this machine).